brazed plate heat exchanger
i need to determine if a brazed plate heat exchanger is ok for my conditions?
the system will heat water using steam,the water must keep a temperature of 80degres celcius
So, what are your conditions?
I am curious as to why you might want to use a plate exchanger rather than a shell and tube exchanger?
Heating water with steam can be a problem depending on the quality of the water and steam. You can be deposits on both sides of the exchangers. A plate type exchanger is not easy to clean or repair. I think it would work okay but could be a real problem if it becomes contaminated with deposits.
I suggest you contact the Trane company in LaCrosse, Wisconsin. They have manufactured these type of exchangers for sometime.
Brazing of flat plate heat exchanger
|
|
OUTDOOR WOOD FURNACE , BRAZED PLATE HEAT EXCHANGER 10P2 $239.00 |
|
|
OUTDOOR WOOD FURNACE , BRAZED PLATE HEAT EXCHANGER 70P2 $570.00 |
|
|
Outdoor Wood Furnace, Brazed Plate Heat Exchanger, 10P $128.00 |
|
|
80 Plate Water to Water Brazed Plate Heat Exchanger $433.00 |
|
|
Outdoor Wood Stove 10-Plate Brazed Plate Heat Exchanger $95.00 |
|
|
10 Plate Copper Brazed Heat Exchanger Stainless Steel 7.5×2.9 1/2 Male NPT $45.00 SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap… |
|
|
Lytron LL520G12 8 3/420plate Coppr Liq-To-Liq Heat Exchanger $69.95 Brazed Plate Liquid-to-Liquid Heat Exchangers Applications: Liquid to Liquid Connection Size: 3/4 Connection Type: 3/4 MNPT Height: 8.0 In. Width: 2.9 In. Depth: 2.2 In…. |
|
|
Lytron LL510G12 8 3/410plate Coppr Liq-To-Liq Heat Exchanger $49.95 Brazed Plate Liquid-to-Liquid Heat Exchangers Applications: Liquid to Liquid Connection Size: 3/4 Connection Type: 3/4 MNPT Height: 8.0 In. Width: 2.9 In. Depth: 1.3 In…. |
|
|
ITT Bell and Gossett 1 34 Plate Exchanger Api Braze Plate Exchanger $1,133.58 Brazed Plate Heat Exchangers Applications: Liquid to Liquid Gallons Per Minute @ 5 PSI: 15 Surface Area: 19.8 Connection Size: 1 Connection Type: NPT or Sweat Height: 20.8 In. Width: 4.9 In…. |
|
|
Dynalene/water correlations to be used for condensation of [CO.sub.2] in brazed plate heat exchangers.(carbon dioxide)(Report): An article from: ASHRAE Transactions $9.95 This digital document is an article from ASHRAE Transactions, published by American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc. on July 1, 2009. The length of the article is 10937 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available immediately after purchase. You can view it with any web browse… |
