heating cooling
Cooling and Heating Concerns in the Data Center Part 1
|
|
HEATING AND COOLING BY TIME LIFE BOOKS! LOADS OF INFO $2.99 |
|
|
Vitalwear Vital Wrap System Heating Cooling Compress $42.05 |
|
|
thermostat programmable hunter heating and cooling new $14.99 |
|
|
1999 LENNOX heating furnace-cooling Air conditioning AD $7.50 |
|
|
Heating, Cooling, Lighting by Lechner, Norbert $35.95 |
|
|
Little Giant VCMA-15ULS Condensate Removal 1/50 HP Pump with Safety Switch $31.40 The company that has always been the forerunner in condensate removal pump design, introduces the new generation VCMA Series. Adding features for every installation. Fully Automatic, new generation float arm for enhanced reliability. Suitable for high-efficiency, gas-furnace condensate. 3 drain holes with 20ft. shut off head and 8.7 PSI. Capable of drawing 50 GPH @ 5ft.. Intermittent Liquid Temp. … |
|
|
Lasko 40-Inch Wind Tower Oscillating Tower Fan with Remote $56.99 40″ Wind Tower Platinum Space-Saving Fan with Remote Control. 3-Speed… |
|
|
Whirlpool Electric Dryer Heating Element 279838 $23.99 THIS WHIRLPOOL 279838 DRYER HEATING ELEMENT WORKS WITH MANY WHIRLPOOL, MAYTAG, KENMORE, ROPER KITCHENAID AND OTHER CLOTHES DRYERS. THIS IS A STANDARD NI-CHROME WIRE HEATING ELEMENT, JUST LIKE THE HEATING ELEMENT IN A TOASTER. THIS HEATING ELEMENT WORKS WHEN A SWITCH ON THE MOTOR Works with the following models: Whirlpool LEC6646AQ0, Whirlpool LER5636, Whirlpool REX3615EW1 Whirlpool WED5530SQ0, Whi… |
|
|
1/70hp 1500RPM CCW 3.3 Diameter 115 Volts Fasco # D121 $35.94 Shaded Pole, Open Ventilation, Air Over. Extra studs can be cut off if not needed. Shaft can also be shortened if necessary. Shaft bushing is also available, 1/4″ to 5/16″ (part # KIT240). Motor is common to bath fans, humidifers and dehumidifers, to name a few applications…. |
|
|
1/30hp 3000RPM CW 3.3 Diameter 115 Volts Fasco # D206 $53.84 Shaded Pole, Open Ventilation, Air Over. Extra studs can be cut off if not needed. Shaft can also be shortened with a hack saw if necessary. Shaft bushing is also available, 1/4″ to 5/16″ (part # KIT240)… |
